91������ý

How to program your remote control

Steps to pair your Fios TV Voice Remote with Fios TV One or Fios TV One Mini.

1. Point the Fios TV Voice Remote toward the Fios TV One you wish to pair it with,
2. Press and hold the Play/Pause and “O” buttons at the same time,
3. Release the buttons when the blue light starts flashing on the Fios TV Voice Remote,
4. When the blue light stops flashing on the Fios TV Voice Remote, your Fios TV Voice Remote is connected, paired and ready for use.

Steps to control your TV or Audio using your Fios TV Voice Remote.

After you’ve paired your Fios TV Voice Remote to your set top box, HDMI-connected TVs and Audio systems should automatically be detected and be controlled by your Fios TV Voice Remote.

1. Go to Menu > Settings > Voice control > Fios TV Voice Remote > Program Voice Remote > Automatic Setup
   1. Once the automatic setup completes you’ll see a “Success” message in the top right of the TV screen,
   2. If this does not work for you, please skip to step 2.
2. Go to Menu > Settings > Voice control > Fios TV Voice Remote > Program Voice Remote > Manual Setup
   1. Select your TV or Receiver Brand and Model and follow the steps,
   2. You will see a “Success” message in the top right of the TV screen when the setup is complete.

��

How to program your remote control

• First, you will need to unpair your old remote. On the Fios TV+ device, press and hold the button on top of the device for 15 seconds.
• You will see an on-screen menu.�� Press the button on the top of your device�� to navigate to the “Unpair remote” menu option.
  
• Once on the “unpair remote” item, press and hold for 3 seconds.
  
• Once the old remote is successfully unpaired, you will be prompted on-screen to pair your new remote.

How to program your remote control

Please read all instructions before starting.

1. Press the��OK��and��FiOS TV��buttons at the same time. Release both buttons and the��red��light on the remote will blink twice and stay on.
2. Next, press and release the��Play/Pause��button once every second until the remote finds the right code and your TV shuts off. When the TV shuts off, stop pressing the��Play/Pause��button.
3. Press the��TV Power��button on the remote to turn the TV on. If the TV turns on, press��OK��to save.

TV won't turn on?��
Press the��Channel Down��button once every second until it turns on. Then press��OK��to save.

Program or replace your remote control using the Interactive Media Guide (IMG)
Using your Fios remote, you can program, replace your remote, or fix Fios TV issues, following the steps below:
Menu��>��Customer Support��>��Top Support Tools��> select your option and follow the on screen prompts

To buy a Fios TV remote visit the��Fios Equipment & Accessories Store.

How to program your remote control

Please read all instructions before starting.

1. Turn on your TV and Fios Set-top box
2. Locate the��3-digit TV code��for your TV. Press the��OK��and��0��buttons at the same time. The��red��light on the remote will blink twice and stay on.
3. Next, enter the��3-digit TV code. The��red��light will blink twice and then stay on.
4. Press and release the��Channel Down��button once every second until the TV turns off. When the TV shuts off, stop pressing the��Play/Pause��button.
5. Press the��TV Power��button on the remote to turn the TV on. If the TV turns on, press��OK��to save.

Note: The 91������ý P283 Big Button Remote is not longer available

How to program your remote control

Please read all instructions before starting.

1. Turn on your TV and Fios Set-top box
2. Locate the 3-digit remote code for your TV. Press and hold the��TV��button and press the��OK��button. Release both buttons. The��redlight on the remote will blink twice and stay on.
3. Next, enter the 3-digit remote code. The��red��light will blink three times.
4. Press the��TV Power��button on the remote to turn the TV off. If the TV turns off, press��OK��to save.

To buy a Fios TV remote visit the��Fios Equipment & Accessories Store.

How to program your remote control

Please read all instructions before starting.

1. Turn on your TV and Fios Set-top box
2. Press and hold��TV��key for 6 seconds. Each device key will light up, then the TV key will remain on.
3. Press the��Power��button on your remote. The device button will blink three times then turn off.
4. Press the��Up��arrow button once every second until the TV turns off.
5. Press��OK��to store the code in your remote.

To buy a Fios TV remote visit the��Fios Equipment & Accessories Store.