91¹û¶³´«Ã½

Some devices may need their Wi-Fi drivers updated to support routers which use Wi-Fi 6 (802.11ax).ÌýAlso, some devices, like TV's and laptops, may not support the latest Wi-Fi technology used by anÌýadvanced router, and may need to be disabled.

Note: Intel Wireless adapters supporting 802.11ac with older drivers might not show Wi-Fi 6Ìý(802.11ax) networks.Ìý.

Yes, Wi-Fi divers should always be updated for optimal Wi-Fi performance. In many cases, but not all,ÌýWi-Fi drivers are automatically updated with auto updates enabled

Note: Intel Wireless adapters supporting 802.11ac with older drivers might not show Wi-Fi 6Ìý(802.11ax) networks.Ìý.

Wi-Fi name/password or Admin name/password can be found on the rear label of your Fios Router.

Yes, SON is supported by default and can be managed within My 91¹û¶³´«Ã½, or locally on the router. VisitÌýverizon.com/sonsupportÌýfor more information.

Access the Wi-Fi setting on your Wi-Fi device, then select your Fios Router using the Wi-Fi nameÌýor Wi-FI network name (ESSID) shown on the label located on the back panel of your router. Enter theÌýWi-Fi password or Wi-FI password (WPA2 key). The default password/key is also shown on the label.

Note: 91¹û¶³´«Ã½ recommends that you establish a strong, unique password for your Wi-Fi. Learn how toÌýchange your Wi-Fi Password below.

Sign intoÌýMy 91¹û¶³´«Ã½Ìýto set up your Guest Wi-fi. To access:

• hover overÌýServices, selectÌýInternet >ÌýunderÌýMy NetworksÌýselect yourÌýGuest Network >ÌýselectÌýEnable Guest Wi-Fi Access

Don’t have an account?

Wi-Fi name and password can be found in My 91¹û¶³´«Ã½ or on a label on your Fios Router

Sign intoÌýMy 91¹û¶³´«Ã½Ìýto view your Wi-Fi name and password. To access:

• hover overÌýServices, selectÌýInternet >ÌýunderÌýMy NetworkÌýtheÌýpasswordÌýis listed below eachÌýnetwork name

Don’t have an account?

The Wi-Fi password is shown on the label located on the side of your Fios Router (G1100).

Please refer to the diagram below:

Your Fios Router comes with a WPS button that allows for a connection to your Wi-Fi network without manually entering a password. If your wireless device supports WPS, follow your device manufacturer user’s guide to set up and connect to your network. VisitÌýMy 91¹û¶³´«Ã½Ìýto manage Wi-Fi settings.

Sign intoÌýMy 91¹û¶³´«Ã½Ìýto manage your settings. To access

• hover overÌýServices, selectÌýInternet

Don’t have an account?

You can also manage advanced settings from the Fios Router interface via your browser.

You can block or set schedules for Wi-Fi access using My 91¹û¶³´«Ã½ or the router interface. Ìý

Sign intoÌýMy 91¹û¶³´«Ã½Ìýto manage your settings. To access:

• Hover overÌýServices, selectÌýInternetÌý> underÌýManage My DevicesÌýselectÌýDevices & Parental Controls

Don’t have an account?

Plug one end of an Ethernet cable into one of the four yellow Ethernet ports on the back of your router.

Plug the other end of the Ethernet cable into the Ethernet port of your network device.

Open your browser and enter "myfiosgateway.com" or "192.168.1.1" into the browser. You will beÌýtaken to a page to enter your username and administrator password:

• The default username is "admin"
• The unique default password is on the label located on the back of the router. Please refer to theÌýdiagram below

Test the speed of your router and devices with theÌý91¹û¶³´«Ã½ Speed TestÌýtool:

• Learn ways to optimize your connection.
• Measure your network's upload and download speeds.
  

Yes, each Fios RouterÌýis preset at the factory to use WPA2 (Wi-Fi Protected Access) encryption for your wireless network. WPA2 is the strongest setting for most users and provides maximum security but may prevent older devices from connecting.

Sets a strong, unique password for your router. VisitÌýMy 91¹û¶³´«Ã½Ìýto change your default password.

Press and hold the Unified button on the front of the router for 10 seconds. Give the router some timeÌýto connect to the Internet and wait until the Internet light becomes steady white.

Pressing and holding the red reset button located on the back of the Fios Router will restore the router to the factory default settings shown on the label located on the side of your router. Use the pointed end of a paperclip to press and hold the reset button for 15 seconds.

Important Note: If you have customized your network name and/or password, resetting your Fios Router to the factory defaults not only changes your router username and password back to the factory default values, but it also deletes all of your home network settings. This includes the ESSID and network encryption key that you created. After you reset your factory defaults, your home network won't be accessible until you reconfigure your gateway and update all your network devices to use the same customized ESSID and network encryption key (WPA2).

Yes, the router supports Tri-Band Wi-Fi, including one 2.4 GHz, & 2 separate 5Ghz Wi-Fi bands. The third band is not exclusively for extenders, but is also available by default, to connect personal devices to, when no extenders are connected over Wi-Fi.

IoT Wi-Fi is a new Wi-Fi option available to you through a separate Wi-Fi name and password.Ìý IoT Wi-Fi broadcasts only on the 2.4 GHz band to improve the setup flow of IoT devices which only use 2.4 GHz. Devices connected to this Wi-Fi are accessible to other devices on the Primary Wi-Fi.